Introduction
This information is the result of collaboration with (Deze informatie is tot stand gekomen middels samenwerking met) : CRAFT-Education Dukaat 17, 5751 PW Deurne
Links
Was this helpful? Please share this with your colleagues and friends:
Straightness The line of an sharp edge must be straight within 0.1mm. This means that the line must fall between two parallel planes with a distance of 0.1 mm between them. These tolerance planes are perpendicular to the arrow of the geometric tolerance indication.
|
Rechtheid De lijn van de scherpe hoek moet een rechtheid hebben van rond 0.1mm. Dit betekent dat deze lijn moet liggen binnen een cylinder met een diameter van 0.1 mm. De lijn mag in zoverre krom zijn zolang de lijn maar binnen een cirkel met een diameter van 0.1 mm blijft.
|